160VXLGK095 Oregon 16" versaCut Chainsaw Guide bar .325 66DL .050

Oregon 160VXLGK095 VersaCut supersedes 160SLGK095 BAR IS 16 INCH. (1.3MM) .325 PITCH .050 GAUGE AND USES 66 DRIVE LINK CHAIN. THIS BAR IS A SPROCKET NOSE.

THIS BAR FITS THE FOLLOWING SAWS WITH A .325 PITCH SPROCKET. NOTE-SOME MODELS USE 3/8 PITCH instead, check sprocket and old bar for info stamped to match pitch if in doubt.

• Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357 , 359, 360, 362, 435, 440, 444, 445,445E, 450, 450E, 455, 455 Rancher, 455E RANCHER, 460, 460 RANCHER, 545, 550XP, 550XPG, 555, 560XP, 560XPG ,1400, 1600, 
• Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P500, P510, PRO-41, PRO-45, PRO-500, PRO-540, PRO-600
• Cub Cadet CS5018, CS5220, CS5720
• Echo  CS-4510
• Efco 147, 152, 156, 165
• Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-5105, PS-6100, PS-6800
• Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES
• John Deere CS46, CS52, CS56, CS62
• Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159, CS2238S, CS2240, CS2250, CS2250S, CS2252, CS2253, CS2253WH, CS2255, CS2258, CS2260, CS2260WH
• Makita DCS 430, DCS 431, DCS 460, DCS 5121, DCS 510, DCS 520i, DCS 5200, DCS 5200i, DCS 540, DCS 6000i, DCS6800i,EA5000P53G  EA6100P53G, EA610153G
• Maruyama POLESAWS: MC-PL11, MC-PS11
• McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20
• Olympyk (Oleo-Mac)  938, 940C, 941, 945, 950, 951, 956, 962
• Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000
• Pioneer 1074, P-21, P-26, P-28, 3270
• Poulan 325
• Powerhorse 190502, 190503
• Redmax G390, G450AVS, G455AVS, G3800
• Sears 35084, 35201
• Solo 614, 630, 631, 632, 633, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656
• Stanley CS05, CS06
• K095 Small mount - bar inside slot height .322 or 8.2mm

• Chain choices for this bar -click the hyperlink below to view and purchase the chain

  20LGX066_PowerCut Pro Full Chisel
  20LPX066_PowerCut Full Chisel
  20BPX066_ControlCut Micro Chisel

Note - this bar only works when matched with .325 pitch sprocket and .325 pitch chain.