17" Pro bar and chain Combo for Husqvarna 372 XP saw

The 178VXLHD009 bar and 73EXL064_chain Combo for Husqvarna 372 XP is a replacement set that includes a lightweight guide bar and the 73EXL chain. With a 17-inch cutting length, this set is designed to replace OEM factory saw bars and has a gauge of 1.5 mm, a pitch of 3/8, and 64 drive links. This is a light weight VersaCut bar with aluminum core.

• D009 Mount bar inside slot height .355 or 9.0mm
• Oregon Combo

This bar fits the following saws with a 3/8 PITCH SPROCKET.

• Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
• Efco: 181 (After Aug 07), MT 7200, MT 8200
• Husqvarna: 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 465 Rancher, 480 CD, 562 XP, 570, 572 XP, 575 XP, 576 XP, 585, 592 XP, 61, 65, 66, 70, 77
  
• Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
• Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
• Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
• Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
• Shindawa (SDK): 550, 575, 577, 680, 695, 757
• Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
• NOTE- .325 and .404 pitch sprockets or chain must be changed to 3/8 pitch to use this bar.

• Chain choices for extra chains for this Combo -click the hyperlink below to view and purchase the extra chain
• 73DPX064_Semi-chisel
• 73EXL064_Full Chisel PowerCut
• 73LPX064_Full chisel super 70
• 73RD064_RipCut Ripping Chain