24" Bar + chain Combo for Husqvarna 365, 371, 372, 575 saw +

24" Bar + chain Combo for Husqvarna chainsaw fits 3/8 pitch model saw-

• 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 480 CD, 562 XP, 570, 572 XP, 575 XP, 576 XP, 585, 592 XP, 61, 65, 66, 70, 77
• Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
• Echo: CS-7310P, CS-7310PW
• Efco: 181 (After Aug 07), MT 7200, MT 8200
• Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
• Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
• Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
• Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
• Shindawa (SDK): 550, 575, 577, 680, 695, 757
• Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
• Specs 3/8 pitch .050 (1.3mm) gauge uses 84 drive link chain
• bar inside slot height .355 or 9.0mm
• NOTE- .325 and .404 pitch sprockets or chain must be changed to 3/8 pitch to use this bar.
• 
• Chain choices to fit this bar -click the hyperlink below to view and purchase extra chains
• 
  
• 72EXJ084_Full Chisel Full Skip PowerCut
  
• 72EXL084_Full Chisel PowerCut
• 72DPX084_VersaCut Semi-chisel
  
• 72LPX084_Full chisel super 70
• 72CL084_Square ground Full chisel
• 72CK084_Square ground full chisel Half skip
• 72CJ084_Square ground Full chisel Full skip
• 72RD084_RipCut Ripping Chain

Bar is 240VXLHD009 and 72EXL0840regon chain in Combo

Matched Specs 24 inch .050 gauge (1.3mm) 84 drive link