27RX194G 404 pitch 194 drive link Ripping saw chain super-skip .063 gauge
27RX194G / 27RX194 Oregon Hyper Skip RipCut Ripping chainsaw chain in 404 pitch 063 gauge
.404 pitch .063 gauge 194 Drive link Super-skip Rip Saw Chain super-skip cutter sequence
Oregon 27RX is a specialty ripping chain designed to be used exclusively on portable sawmill slabbing machines with electric motors and 4 cycle gas engines, such as the D&L, Lucas, package, and Peterson sawmills. It is built with a hyper skip chain sequence 9 inches between left and right cutters, which allows for greater chip clearance on super wide cuts. It is most commonly used to slab logs into lumber, cutting burls and stumps into tabletops. This ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log, and because it has few cutters, it is quicker to sharpen. This chain is recommended for milling purposes only, therefore not recommended for standard handheld use
- Sharpens at a 10-degree angle with a 7/32" file (part#_70502_)
- Maintain depth gauge at .030 clearance
If you have a 27, 52, 59, or 68 stamped on your current Oregon drive link and there are 194 drive links counted or bar stamped 404 063 194DL, then this chain will fit your saw.
Product Type Saw Chain Prop 65 Description WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
You may also like...